PROTECTION FILTERS AGAINST LEGIONELLA AND DANGEROUS BACTERIAS. FOR HOTELS, RESTAURANTS, OFFICES, DEPARTMENTS AND HOUSEHOLDS
|
|
Legionella proliferate mainly in complex water networks of large buildings such as hospitals, nursing and old people's homes, accommodation facilities and baths. However, these bacteria can also find good reproduction conditions in water supply systems of residential complexes and in other water-bearing systems, e.g. cooling towers, whirlpools, humidification systems, interior decoration fountains, pool baths, car washes or in natural thermal springs and their distribution systems and can increase to a number that is questionable for humans. Legionella proliferate at temperatures between 25 °C and 45 °C and stagnant water in biofilms, which are layers of mucus in which microorganisms are embedded. Legionella only die quickly at temperatures above 60 °C.
Legionella lurk in the water and can cause a severe form of pneumonia. For example, if many of these bacteria enter the lungs via water vapour when showering. To provide optimum protection, for example when showering or brushing teeth, Scope Asia offers various types of germ filters. Please contact us if you have any questions. |
Scope Asia Products
|
|
Scope Asia Legionella Filter
|
|
|
Scope Asia legionella protection shower head
|
|
|
Scope Asia Inline Filter for installation in the water pipe
|
Scope Asia Legionella Filter*
$300.00 - $361.00
Inline water filter with microfiltration membrane for the separation of microorganisms from drinking- and process water.
- Separation: Log 99.99999%
- Cut-off limit: 0.1 μm
- Easy change of cartridges, by bayonet connection with water stop function.
- Service life of the filter until replacement up to 13,000 liters.(depending on the water quality in the inlet)
- Sterilized filter material, tested according to ISO 9001:2008, CE
- Marked medical devices EN ISO 13485:2003 & ISO 11137 - 1:2006
- All filters are 100% leak tested before delivery
- Tested for durability at elevated water temperature and chlorine in the water up to a capacity of 13000 liters
- CE Seal Class 1
The replacement of the filter cartridge becomes necessary when the water flow rate meets the requirements of the customer is no longer sufficient. Even with decreasing throughput, the separation of germs (legionella) from the water is 100% guaranteed.
*THE PRICE IS EXCLUDING SHIPMENT / TRANSPORTATION FEE
Scope Asia legionella protection shower head*
$213.00 - $219.00
Shower head with integrated filter to protect against legionella in shower water.
Easy to install and change by screwing it onto the shower hose.
Two variants are available:
1. Type K: with ceramic filter
- Capacity until change 30.000 to 33.000 litres
- Up to 1,100 showers(x1) at 30 litres water per shower.
2. Type H: with hollow fibre module
- Capacity up to change 5,000 to 6,000 litres
- Up to 200 showers(x1) at 30 litres water per shower ((x1) depending on the quality of the raw water)
Notes:
You don't need to replace the entire shower head to install the legionella protection filter. You only need to change the handle and replace it with the new one.
*THE PRICE IS EXCLUDING SHIPMENT / TRANSPORTATION FEE
Scope Asia Inline Filter for installation in the water pipe*
$63.00 - $216.00
The Scope Asia water filters are used to remove legionella from drinking water.
Ceramic modules and hollow fiber modules are used in the filter housings.
Depending on the quality of the raw water, it is advisable to place a pre-filter in front of the legionella filters, since the filter modules have a pore width of 0.1 μm and could block prematurely due to contamination with turbidity.
Scope Asia products can basically be used for filtering drinking water and in hospitals for rinsing medical products, for surgical hand washing, preparing food and drinks or for patient hygiene.
Available filter types:
- Double-walled polysulfone hollow fiber
- Ceramic filter with pore size 0.1 μm
Filter housing ABS medical grade
Diaphragm fineness 0.1 μm
Flow rate 10 L / min. at 1.5 - 3 bar
Physical performance in terms of resistance to temperature and chlorine, tested up to 33000 litres (depending on water quality)
Conditions of use:
- Max. 6 bar at 60° C
- Max. 70° C for max. 30 min.
- Max. 300 ppm chlorine in 12 h
*THE PRICE IS EXCLUDING SHIPMENT / TRANSPORTATION FEE
